М2О-219Мки-20

Back to group selection

01.01
01.09
Wed
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
07.09
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
08.09
Wed
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
14.09
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
15.09
Wed
09:00 – 10:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
10:45 – 12:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
16.09
Thu
09:00 – 10:30
Lecture
Operation research and tests
department — каф.
10:45 – 12:15
Lecture
Operation research and tests
department — каф.
17.09
Fri
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
18.09
Sat
09:00 – 10:30
Lecture
The quality mat surface
department — каф.
10:45 – 12:15
Lecture
The quality mat surface
department — каф.
21.09
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
22.09
Wed
09:00 – 10:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
10:45 – 12:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
23.09
Thu
09:00 – 10:30
Lecture
Operation research and tests
department — каф.
10:45 – 12:15
Lecture
Operation research and tests
department — каф.
24.09
Fri
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
25.09
Sat
09:00 – 10:30
Lecture
The quality mat surface
department — каф.
10:45 – 12:15
Lecture
The quality mat surface
department — каф.
28.09
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
29.09
Wed
09:00 – 10:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
10:45 – 12:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
30.09
Thu
09:00 – 10:30
Lecture
Operation research and tests
department — каф.
10:45 – 12:15
Lecture
Operation research and tests
department — каф.
01.10
Fri
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
02.10
Sat
09:00 – 10:30
Lecture
The quality mat surface
department — каф.
10:45 – 12:15
Lecture
The quality mat surface
department — каф.
05.10
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
06.10
Wed
09:00 – 10:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
10:45 – 12:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
07.10
Thu
09:00 – 10:30
Lecture
Operation research and tests
department — каф.
10:45 – 12:15
Lecture
Operation research and tests
department — каф.
08.10
Fri
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
09.10
Sat
09:00 – 10:30
Lecture
The quality mat surface
department — каф.
10:45 – 12:15
Lecture
The quality mat surface
department — каф.
12.10
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
13.10
Wed
09:00 – 10:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
10:45 – 12:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
14.10
Thu
09:00 – 10:30
Lecture
Operation research and tests
department — каф.
10:45 – 12:15
Lecture
Operation research and tests
department — каф.
15.10
Fri
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
16.10
Sat
09:00 – 10:30
Lecture
The quality mat surface
department — каф.
10:45 – 12:15
Lecture
The quality mat surface
department — каф.
19.10
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
20.10
Wed
09:00 – 10:30
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
10:45 – 12:15
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
21.10
Thu
09:00 – 10:30
Practical lesson
Operation research and tests
department — каф.
10:45 – 12:15
Practical lesson
Operation research and tests
department — каф.
22.10
Fri
09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
23.10
Sat
09:00 – 10:30
Practical lesson
The quality mat surface
department — каф.
10:45 – 12:15
Practical lesson
The quality mat surface
department — каф.
26.10
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
27.10
Wed
09:00 – 10:30
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
10:45 – 12:15
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
28.10
Thu
09:00 – 10:30
Practical lesson
Operation research and tests
department — каф.
10:45 – 12:15
Practical lesson
Operation research and tests
department — каф.
29.10
Fri
09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
30.10
Sat
09:00 – 10:30
Practical lesson
The quality mat surface
department — каф.
10:45 – 12:15
Practical lesson
The quality mat surface
department — каф.
02.11
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
03.11
Wed
09:00 – 10:30
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
10:45 – 12:15
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
14:45 – 16:15
Lecture
Computer design of units and parts GTE
department — каф.
05.11
Fri
09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
06.11
Sat
09:00 – 10:30
Practical lesson
The quality mat surface
department — каф.
10:45 – 12:15
Practical lesson
The quality mat surface
department — каф.
09.11
Tue
10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10.11
Wed
09:00 – 10:30
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
10:45 – 12:15
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
department — каф.
14:45 – 16:15
Practical lesson
Computer design of units and parts GTE
department — каф.
11.11
Thu
09:00 – 10:30
Practical lesson
Operation research and tests
department — каф.
10:45 – 12:15
Practical lesson
Operation research and tests
department — каф.
12.11
Fri
09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
department — каф.
13.11
Sat
09:00 – 10:30
Practical lesson
The quality mat surface
department — каф.
10:45 – 12:15
Practical lesson
The quality mat surface
department — каф.
16.11
Tue
10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
17.11
Wed
14:45 – 16:15
Practical lesson
Computer design of units and parts GTE
department — каф.
23.11
Tue
10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
24.11
Wed
14:45 – 16:15
Practical lesson
Computer design of units and parts GTE
department — каф.
30.11
Tue
10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
01.12
Wed
14:45 – 16:15
Practical lesson
Computer design of units and parts GTE
department — каф.
07.12
Tue
10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
08.12
Wed
14:45 – 16:15
Practical lesson
Computer design of units and parts GTE
department — каф.
14.12
Tue
10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
15.12
Wed
14:45 – 16:15
Practical lesson
Computer design of units and parts GTE
department — каф.
21.12
Tue
10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
22.12
Wed
14:45 – 16:15
Practical lesson
Computer design of units and parts GTE
department — каф.
28.12
Tue
10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
department — каф.
13:00 – 14:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
29.12
Wed
14:45 – 16:15
Practical lesson
Computer design of units and parts GTE
department — каф.
15.01
Sat
09:00 – 10:30
Examination
The quality mat surface
department — каф.
10:45 – 12:15
Examination
The quality mat surface
department — каф.
21.01
Fri
09:00 – 10:30
Examination
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Examination
Heat and Mass Exchange. Heat Engineering
department — каф.

You can select other learning week

101.09.2021 - 05.09.2021
206.09.2021 - 12.09.2021
313.09.2021 - 19.09.2021
420.09.2021 - 26.09.2021
527.09.2021 - 03.10.2021
604.10.2021 - 10.10.2021
711.10.2021 - 17.10.2021
818.10.2021 - 24.10.2021
925.10.2021 - 31.10.2021
1001.11.2021 - 07.11.2021
1108.11.2021 - 14.11.2021
1215.11.2021 - 21.11.2021
1322.11.2021 - 28.11.2021
1429.11.2021 - 05.12.2021
1506.12.2021 - 12.12.2021
1613.12.2021 - 19.12.2021
1720.12.2021 - 26.12.2021
1827.12.2021 - 02.01.2022

Ask any question