М2О-219Мки-19
Back to group selection
01.01
03.09
Thu09:00 – 10:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
04.09
Fri09:00 – 10:30
Lecture
Operation research and tests
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Operation research and tests
Building№02 — 215(2А)
10.09
Thu09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
12.09
Sat10:45 – 12:15
Lecture
The quality mat surface
Building№02 — 215(2А)
13:00 – 14:30
Lecture
The quality mat surface
Building№02 — 215(2А)
14.09
Mon10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
15.09
Tue09:00 – 10:30
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14:45 – 16:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
16.09
Wed09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
17.09
Thu09:00 – 10:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
18.09
Fri09:00 – 10:30
Lecture
Operation research and tests
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Operation research and tests
Building№02 — 215(2А)
21.09
Mon10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
23.09
Wed09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
24.09
Thu09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
26.09
Sat10:45 – 12:15
Lecture
The quality mat surface
Building№02 — 215(2А)
13:00 – 14:30
Lecture
The quality mat surface
Building№02 — 215(2А)
28.09
Mon10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
29.09
Tue09:00 – 10:30
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14:45 – 16:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
30.09
Wed09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
01.10
Thu09:00 – 10:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
02.10
Fri09:00 – 10:30
Lecture
Operation research and tests
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Operation research and tests
Building№02 — 215(2А)
05.10
Mon10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
07.10
Wed09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
08.10
Thu09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
10.10
Sat10:45 – 12:15
Lecture
The quality mat surface
Building№02 — 215(2А)
13:00 – 14:30
Lecture
The quality mat surface
Building№02 — 215(2А)
12.10
Mon10:45 – 12:15
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13.10
Tue09:00 – 10:30
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14:45 – 16:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14.10
Wed09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
15.10
Thu09:00 – 10:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
16.10
Fri09:00 – 10:30
Lecture
Operation research and tests
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Operation research and tests
Building№02 — 215(2А)
21.10
Wed09:00 – 10:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
10:45 – 12:15
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
22.10
Thu09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
24.10
Sat10:45 – 12:15
Lecture
The quality mat surface
Building№02 — 215(2А)
13:00 – 14:30
Lecture
The quality mat surface
Building№02 — 215(2А)
27.10
Tue09:00 – 10:30
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14:45 – 16:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
28.10
Wed09:00 – 10:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
10:45 – 12:15
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
29.10
Thu09:00 – 10:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
30.10
Fri09:00 – 10:30
Lecture
Operation research and tests
Building№02 — 215(2А)
10:45 – 12:15
Lecture
Operation research and tests
Building№02 — 215(2А)
02.11
Mon10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13:00 – 14:30
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
03.11
Tue09:00 – 10:30
Practical lesson
Computer design of units and parts GTE
Building№02 — 109(2В)
10:45 – 12:15
Practical lesson
Computer design of units and parts GTE
Building№02 — 109(2В)
13:00 – 14:30
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14:45 – 16:15
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
05.11
Thu09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
09.11
Mon10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13:00 – 14:30
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
10.11
Tue09:00 – 10:30
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
10:45 – 12:15
Lecture
Computer design of units and parts GTE
Building№02 — 109(2В)
13:00 – 14:30
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14:45 – 16:15
Lecture
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
11.11
Wed09:00 – 10:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
10:45 – 12:15
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
12.11
Thu09:00 – 10:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
10:45 – 12:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
13.11
Fri09:00 – 10:30
Practical lesson
Operation research and tests
Building№02 — 215(2А)
10:45 – 12:15
Practical lesson
Operation research and tests
Building№02 — 215(2А)
16.11
Mon10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13:00 – 14:30
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
17.11
Tue09:00 – 10:30
Practical lesson
Computer design of units and parts GTE
Building№02 — 109(2В)
10:45 – 12:15
Practical lesson
Computer design of units and parts GTE
Building№02 — 109(2В)
13:00 – 14:30
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14:45 – 16:15
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
18.11
Wed09:00 – 10:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
10:45 – 12:15
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
Building№02 — 109(2В)
19.11
Thu09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
21.11
Sat10:45 – 12:15
Practical lesson
The quality mat surface
Building№02 — 215(2А)
13:00 – 14:30
Practical lesson
The quality mat surface
Building№02 — 215(2А)
23.11
Mon10:45 – 12:15
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
13:00 – 14:30
Practical lesson
Structural strength of major assemblies and advanced gas-turbine engines parts
Building№02 — 109(2В)
26.11
Thu09:00 – 10:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
10:45 – 12:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
27.11
Fri09:00 – 10:30
Practical lesson
Operation research and tests
Building№02 — 215(2А)
10:45 – 12:15
Practical lesson
Operation research and tests
Building№02 — 215(2А)
01.12
Tue09:00 – 10:30
Practical lesson
Computer design of units and parts GTE
Building№02 — 109(2В)
10:45 – 12:15
Practical lesson
Computer design of units and parts GTE
Building№02 — 109(2В)
13:00 – 14:30
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14:45 – 16:15
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
03.12
Thu09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
05.12
Sat10:45 – 12:15
Practical lesson
The quality mat surface
Building№02 — 215(2А)
13:00 – 14:30
Practical lesson
The quality mat surface
Building№02 — 215(2А)
10.12
Thu09:00 – 10:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
10:45 – 12:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
11.12
Fri09:00 – 10:30
Practical lesson
Operation research and tests
Building№02 — 215(2А)
10:45 – 12:15
Practical lesson
Operation research and tests
Building№02 — 215(2А)
15.12
Tue09:00 – 10:30
Practical lesson
Computer design of units and parts GTE
Building№02 — 109(2В)
10:45 – 12:15
Practical lesson
Computer design of units and parts GTE
Building№02 — 109(2В)
13:00 – 14:30
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
14:45 – 16:15
Practical lesson
Selected Problems in Thermophysics and Continuum Mechanics
Building№02 — 104(2В)
17.12
Thu09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
Building№02 — 104(2В)
19.12
Sat10:45 – 12:15
Practical lesson
The quality mat surface
Building№02 — 215(2А)
13:00 – 14:30
Practical lesson
The quality mat surface
Building№02 — 215(2А)
24.12
Thu09:00 – 10:30
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
10:45 – 12:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Building№02 — 215(2А)
25.12
Fri09:00 – 10:30
Practical lesson
Operation research and tests
Building№02 — 215(2А)
10:45 – 12:15
Practical lesson
Operation research and tests
Building№02 — 215(2А)
16.01
Sat10:45 – 12:15
Examination
The quality mat surface
Building№02 — 215(2А)
13:00 – 14:30
Examination
The quality mat surface
Building№02 — 215(2А)
21.01
Thu09:00 – 10:30
Examination
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Examination
Heat and Mass Exchange. Heat Engineering
department — каф.
18.02
Thu09:00 – 10:30
Lecture
CFD Tools
department — каф.
10:45 – 12:15
Lecture
CFD Tools
department — каф.
25.02
Thu09:00 – 10:30
Lecture
Computer Aidede Modelling in Thermophysics
department — каф.
10:45 – 12:15
Lecture
Computer Aidede Modelling in Thermophysics
department — каф.
04.03
Thu09:00 – 10:30
Lecture
CFD Tools
department — каф.
10:45 – 12:15
Lecture
CFD Tools
department — каф.
11.03
Thu09:00 – 10:30
Lecture
Computer Aidede Modelling in Thermophysics
department — каф.
10:45 – 12:15
Lecture
Computer Aidede Modelling in Thermophysics
department — каф.
You can select other learning week
Ask any question
Or you can contact us by
phone number using Telegram or WhatsApp application service