М2О-215Мки-20

Back to group selection

01.01
06.09
Mon
09:00 – 10:30
Lecture

Main Educational Building(zone V) — 705-и
10:45 – 12:15
Lecture

Main Educational Building(zone V) — 705-и
13:00 – 14:30
Lecture
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14:45 – 16:15
Practical lesson
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
07.09
Tue
09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
13:00 – 14:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
08.09
Wed
16:30 – 18:00
Lecture
The quality mat surface
department — каф.
18:15 – 19:45
Practical lesson
The quality mat surface
department — каф.
09.09
Thu
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Lecture
PLM technologies in the production of gas turbine engines
department — каф.
14.09
Tue
09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
16.09
Thu
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Lecture
PLM technologies in the production of gas turbine engines
department — каф.
20.09
Mon
09:00 – 10:30
Lecture

Main Educational Building(zone V) — 705-и
10:45 – 12:15
Lecture

Main Educational Building(zone V) — 705-и
13:00 – 14:30
Lecture
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14:45 – 16:15
Practical lesson
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
21.09
Tue
09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
13:00 – 14:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
22.09
Wed
16:30 – 18:00
Lecture
The quality mat surface
department — каф.
18:15 – 19:45
Practical lesson
The quality mat surface
department — каф.
23.09
Thu
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Lecture
PLM technologies in the production of gas turbine engines
department — каф.
28.09
Tue
09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
30.09
Thu
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Lecture
PLM technologies in the production of gas turbine engines
department — каф.
04.10
Mon
09:00 – 10:30
Lecture

Main Educational Building(zone V) — 705-и
10:45 – 12:15
Lecture

Main Educational Building(zone V) — 705-и
13:00 – 14:30
Lecture
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14:45 – 16:15
Practical lesson
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
05.10
Tue
09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
13:00 – 14:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
06.10
Wed
16:30 – 18:00
Lecture
The quality mat surface
department — каф.
18:15 – 19:45
Practical lesson
The quality mat surface
department — каф.
07.10
Thu
09:00 – 10:30
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Lecture
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Lecture
PLM technologies in the production of gas turbine engines
department — каф.
12.10
Tue
09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
14.10
Thu
09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Lecture
PLM technologies in the production of gas turbine engines
department — каф.
18.10
Mon
09:00 – 10:30
Lecture

Main Educational Building(zone V) — 705-и
10:45 – 12:15
Lecture

Main Educational Building(zone V) — 705-и
13:00 – 14:30
Lecture
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14:45 – 16:15
Practical lesson
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
19.10
Tue
09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
13:00 – 14:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
20.10
Wed
16:30 – 18:00
Lecture
The quality mat surface
department — каф.
18:15 – 19:45
Practical lesson
The quality mat surface
department — каф.
21.10
Thu
09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.
26.10
Tue
09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
28.10
Thu
09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.
01.11
Mon
09:00 – 10:30
Lecture

Main Educational Building(zone V) — 705-и
10:45 – 12:15
Lecture

Main Educational Building(zone V) — 705-и
13:00 – 14:30
Lecture
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14:45 – 16:15
Practical lesson
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
02.11
Tue
09:00 – 10:30
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Lecture
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
13:00 – 14:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
09.11
Tue
09:00 – 10:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
11.11
Thu
09:00 – 10:30
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
10:45 – 12:15
Practical lesson
Heat and Mass Exchange. Heat Engineering
department — каф.
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.
15.11
Mon
09:00 – 10:30
Practical lesson

Main Educational Building(zone V) — 705-и
10:45 – 12:15
Practical lesson

Main Educational Building(zone V) — 705-и
13:00 – 14:30
Lecture
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14:45 – 16:15
Practical lesson
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
16.11
Tue
09:00 – 10:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
13:00 – 14:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
17.11
Wed
16:30 – 18:00
Lecture
The quality mat surface
department — каф.
18:15 – 19:45
Practical lesson
The quality mat surface
department — каф.
18.11
Thu
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.
23.11
Tue
09:00 – 10:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
25.11
Thu
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.
29.11
Mon
09:00 – 10:30
Practical lesson

Main Educational Building(zone V) — 705-и
10:45 – 12:15
Practical lesson

Main Educational Building(zone V) — 705-и
13:00 – 14:30
Lecture
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14:45 – 16:15
Practical lesson
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
30.11
Tue
09:00 – 10:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
13:00 – 14:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
01.12
Wed
16:30 – 18:00
Lecture
The quality mat surface
department — каф.
18:15 – 19:45
Practical lesson
The quality mat surface
department — каф.
02.12
Thu
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.
07.12
Tue
09:00 – 10:30
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
10:45 – 12:15
Practical lesson
Designing of major assemblies, parts and systems of new generation gas-turbine engines
department — каф.
09.12
Thu
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.
13.12
Mon
09:00 – 10:30
Practical lesson

Main Educational Building(zone V) — 705-и
10:45 – 12:15
Practical lesson

Main Educational Building(zone V) — 705-и
13:00 – 14:30
Lecture
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14:45 – 16:15
Practical lesson
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14.12
Tue
13:00 – 14:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
15.12
Wed
16:30 – 18:00
Lecture
The quality mat surface
department — каф.
18:15 – 19:45
Practical lesson
The quality mat surface
department — каф.
16.12
Thu
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.
23.12
Thu
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.
27.12
Mon
09:00 – 10:30
Practical lesson

Main Educational Building(zone V) — 705-и
10:45 – 12:15
Practical lesson

Main Educational Building(zone V) — 705-и
13:00 – 14:30
Lecture
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
14:45 – 16:15
Practical lesson
New materials and methods of their processing
Main Educational Building(zone V) — 706-и
28.12
Tue
13:00 – 14:30
Lecture
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
14:45 – 16:15
Practical lesson
Production and assemblage of gas-turbine engines assemblies and modules
Main Educational Building(zone V) — 705-и
29.12
Wed
16:30 – 18:00
Lecture
The quality mat surface
department — каф.
18:15 – 19:45
Practical lesson
The quality mat surface
department — каф.
30.12
Thu
13:00 – 14:30
Practical lesson
Foreign language 3
Main Educational Building(zone A) — 505
14:45 – 16:15
Practical lesson
PLM technologies in the production of gas turbine engines
department — каф.

You can select other learning week

101.09.2021 - 05.09.2021
206.09.2021 - 12.09.2021
313.09.2021 - 19.09.2021
420.09.2021 - 26.09.2021
527.09.2021 - 03.10.2021
604.10.2021 - 10.10.2021
711.10.2021 - 17.10.2021
818.10.2021 - 24.10.2021
925.10.2021 - 31.10.2021
1001.11.2021 - 07.11.2021
1108.11.2021 - 14.11.2021
1215.11.2021 - 21.11.2021
1322.11.2021 - 28.11.2021
1429.11.2021 - 05.12.2021
1506.12.2021 - 12.12.2021
1613.12.2021 - 19.12.2021
1720.12.2021 - 26.12.2021
1827.12.2021 - 02.01.2022

Ask any question